spec no: dsal5003 rev no: v.4b date: may/27/2016 page: 1 of 5 approved: wynec checked: allen liu drawn: l.t.zhang er p: 1203000583 3.0mmx1.0 mm right angle smd chip led lamp part number: APA3010MGC-GX mega green features z 3.0x2.0x1.0mm right angle smd led, 1.0mm thickness. z low power consumption. z wide viewing angle. z ideal for back light and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z tinned pads for improved solderability. z rohs compliant. description the mega green source color devices are made with al- gainp on gaas substrat e light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsal5003 rev no: v.4b date: may/27/2016 page: 2 of 5 approved: wynec checked: allen liu drawn: l.t.zhang er p: 1203000583 selection guide absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c part no. emitting color (material) lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. max. 2 1/2 APA3010MGC-GX mega green (algainp) water clear 40 60 80 120 symbol parameter emitting color typ. max. units test conditions peak peak wavelength mega green 574 nm i f =20ma d [1] dominant wavelength mega green 570 571 nm i f =20ma ? 1/2 spectral line half-width mega green 26 nm i f =20ma c capacitance mega green 20 pf v f =0v;f=1mhz v f [2] forward voltage mega green 2.1 2.5 v i f =20ma i r reverse current mega green 10 ua v r =5v parameter values units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. 3. luminous intensity value is traceable to cie127-2007 standards. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v. 3. wavelength value is traceable to cie127-2007 standards. 4. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd625-a and jedec/j-std-033.
spec no: dsal5003 rev no: v.4b date: may/27/2016 page: 3 of 5 approved: wynec checked: allen liu drawn: l.t.zhang er p: 1203000583 mega green APA3010MGC-GX
spec no: dsal5003 rev no: v.4b date: may/27/2016 page: 4 of 5 approved: wynec checked: allen liu drawn: l.t.zhang er p: 1203000583 APA3010MGC-GX reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsal5003 rev no: v.4b date: may/27/2016 page: 5 of 5 approved: wynec checked: allen liu drawn: l.t.zhang er p: 1203000583 packing & label specifications APA3010MGC-GX terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
